How much is Honda Fit cleaning the throttle? New Fit Throttle Cleaning Course.

The general cleaning cost of Honda Fit throttle is about 120 yuan. Honda Fit Throttle Cleaning Tutorial: Actually, it is not difficult to clean the throttle technically, but it must be handled with professional tools and detergents. Before cleaning the throttle, it is necessary to check the working state of the vehicle engine with the vehicle scanning tool to confirm whether the throttle needs to be cleaned. Turn off the engine, remove the accelerator and clean it with detergent. It should be noted that many automobile brands now have special coatings on the metal on the throttle surface, so it is necessary to control the cleaning efforts to prevent the coating from being damaged. If the carbon deposit is serious, you can directly spray a proper amount of detergent on the throttle valve, and then clean the cleaned parts after they fully react with the carbon deposit. Since the throttle valve is located between the near header and the intake manifold, the intake pipe must be removed before cleaning the throttle valve. After writing down the intake pipe, you can see a circle of black carbon deposit in front of the throttle. These carbon deposits will reduce the air flow in idle time and space, thus affecting the work of the engine. When the throttle body is disassembled, it can be seen that the carbon deposit on the back of the throttle is serious, resulting in low idle speed. When cleaning, try to avoid spraying the cleaning agent directly on the accelerator, but spray it on a soft rag to wipe it, so as to reduce the damage to the metal coating. After cleaning the throttle, you can restart the engine. At this time, it is necessary to use a scan tool to check the running state of the engine again. For example, the carbon deposit on the accelerator before cleaning is quite serious. After cleaning, it is necessary to use diagnostic equipment to adjust the computer of the car and learn the throttle position in the new state.