How to reset Changan Auchan after cleaning the throttle?

Reset method of changan auchan after cleaning the throttle.

1. First, unplug the car key, open the hood and find the throttle of the engine.

2. Remove the air filter and intake pipe with a flat screwdriver, and unplug the electric socket on the throttle; Then unscrew the three hexagon screws on the throttle with a hexagon screwdriver (pay attention to this step, and be careful that the screws are "lost"). After removing the screw, you can take out the throttle valve together, and then block the air inlet of the engine with a dry rag to prevent dirt from entering the engine.

3. First check whether the removed throttle is black, and then spray the cleaner, and the dirt will slowly dissolve. At this time, you can wipe it with a paper towel and spray the detergent again, and the throttle will become clean and beautiful. After that, you don't need to wipe it with a paper towel, so that the residual detergent can be left on it.

4. Reverse the disassembly sequence and reset one by one; Finally, turn the key to the ignition position (do not start) and turn it off after 5 seconds. This is an "initialization" process.