Baojun 3 10 throttle matching method, how to reset Baojun 3 10 throttle?

There are two ways to reset the throttle of Baojun 3 10 according to different cars: the first way is to turn on the key to the second gear, that is, the gear indicated by the instrument is fully lit, then wait for 20 seconds, press the throttle to the bottom and hold it for about 10 second, then release the throttle, turn off the ignition switch, pull out the key and finish the initialization. The second is to turn on the key in the second gear and hold it for 30 seconds, then turn off the ignition switch and pull out the key. It should be noted that after the two methods are completed, it will take some time to try to ignite. Generally, you can wait 15-20 seconds, and then ignite to see if the refueling is normal and the engine fault light is off. If at first you don't succeed, you can do it again until you succeed. You can usually succeed once, at most twice. But according to different cars, the method of restoration is different. Some cars must be initialized by a computer. In that case, the owner is advised to send the car to a shop with professional equipment for cleaning. After cleaning the throttle body, it is best to use a diagnostic computer for initialization. Many models can also manually match the throttle body. After matching, the idle speed is stable and the fuel consumption is the most economical. If there is no difference between idle speed and before cleaning, the engine is working normally and there is no problem.