18 Kawasaki z900, how to remove the fault light?

1. Solution: After checking the circuit in the 4S shop, initialize the throttle with a computer to solve the problem. This is because when the throttle position sensor is put back, the circuit is not connected properly, or when the throttle is not completely put back, the vehicle is started by ignition, resulting in abnormal sensor signal.

2. The throttle valve is a component above the air intake system. Its main function is to control the air intake. Its corresponding variable is the response of how much the accelerator is depressed. The more you step on the throttle, the bigger the throttle and the more air intake.

3. Throttle failure will lead to unsealed cylinder and gas mixture leakage. If the pressure in the cylinder is not enough, ignition is very difficult (high voltage electricity also exists, that is, the pressure in the cylinder and the compression temperature of the mixed gas can not meet the ignition conditions). In severe cases, the cooler can't get on the bus, the combustion is incomplete, the locomotive has no electricity, and it can also cause fart (the sound of guns in the exhaust pipe).

There are two kinds of throttles: traditional cable throttle and electronic throttle. The traditional engine throttle control mechanism works through a cable (soft steel wire) or a pull rod. One end of the cable is connected with the accelerator pedal, and the other end is connected with the accelerator linkage plate. The electronic throttle mainly uses the throttle position sensor to control the throttle opening according to the energy required by the engine, so as to adjust the intake air.