Adjustment skills of gas stove damper When do you need a damper?

When using the gas stove, we may find some headache problems due to untimely maintenance or improper installation and operation methods, including non-ignition of the outer ring and yellow fire. When this kind of problem occurs, the damper needs to be adjusted. However, according to the different structural design of gas stoves, including knob gas stoves and external gas stoves, the operation required to adjust the damper is completely different, and consumers and friends can learn and understand it comprehensively.

? First, how to adjust the gas stove damper 1, the room light should not be too strong, and it can be properly shielded, mainly to clearly observe the shape and color of the gas stove flame.

2, gas stove should not be empty burning adjustment, it is best to put something on the pot, the pot is in working condition.

3. Check whether the air door of the gas stove is attached to the ejector and whether the spring force is normal enough to hold the air door.

4. Turn off the gas stove baffle to the minimum, observe the flame color and firepower, and then adjust it to the maximum observation.

5. After remembering the first two states, change the throttle from big to small, with the strongest firepower and the bluest flame.

6. If the throttle adjustment of the gas cooker has no effect on the flame, either the quality of your cooker is poor or there is a problem, please ask a professional to deal with it.

Second, the throttle position of the gas stove?

There are two types of gas stove dampers: external and internal. Built-in requires professional operation.

The external ones are usually at the bottom of the stove. The gas stove needs to be lifted by hand, and there are two iron plates (or knobs) with handles at the joint between the burner and the nozzle, one for adjusting the small fire and the other for adjusting the big fire; They all cling to the burner through springs, and the size of the air inlet can be adjusted by gently pulling the handle or knob, thus changing the state of the flame.

Third, under what circumstances do you need to adjust the damper?

1, when the gas stove appears yellow fire, red fire and black smoke;

2. There is noise and tempering when the gas stove burns;

3. The gas stove can't catch fire because the air door is too big;

4. Which state is the best for adjusting the throttle of gas stove?

If your stove is the source of artificial gas, you need to close all the dampers. If it is natural gas or liquefied gas, adjust the damper until there is no yellow fire. Take natural gas as an example, as shown in the following figure, 1 is the most correct throttle adjustment (the flame is blue, the flame sticks to the fire hole, the internal and external flames are distinct, the flame is strong, and there is a slight whirring sound), Figure 2 shows that the throttle opening is too small (the flame is accompanied by yellow flame, the internal and external flames are turbid, and the flame is long and weak), while Figure 3 shows that the throttle opening is too large (there is a fire from the flame, and the root of the flame cannot stick).

According to the different structural design of the gas stove and the analysis of the causes of the failure later, the adjustment method of the gas stove damper that we should carry out is completely different. The example we gave you above is a representative one. Therefore, dampers can be divided into knob dampers or embedded dampers. Consumer friends try to operate after analyzing the specific classification of shock absorbers. In addition, if necessary, it can be analyzed in combination with professional practice and the instructions in the manual.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~