Does finidi fx35 need to be equipped after cleaning the throttle?

The finidi fx 35 needs to be matched after cleaning the throttle valve, and the initialization of cleaning the throttle valve is inevitable. If there is too much sludge in the throttle, it may lead to weak engine acceleration and increase fuel consumption.

When cleaning the throttle valve, first remove the intake throat to expose the throttle valve, remove the negative electrode of the battery, turn off the ignition switch, straighten the throttle plate and spray a small amount into the throttle valve. Carburetor cleaner? Then use polyester rags or high spinning? Nonwoven fabric? Scrub carefully. Deep in the throttle, where you can't reach it, you can scrub it carefully with a rag.

After cleaning, the throttle will be initialized according to the disassembly procedure just now. After cleaning the throttle, it needs to be initialized, because the computer has a memory function when adjusting the throttle opening, because there was sludge blockage in the past. In order to ensure the air intake, the computer will automatically adjust the throttle opening to make the air intake in a normal state. But there is no sludge blockage after cleaning. If the throttle valve still maintains its previous opening, it will cause excessive intake air. As a result, the engine will shake when starting, and the acceleration will be weak, and the engine fault light may light up.

There are two ways to initialize according to different cars: the first way is to turn on the key to the second gear, then wait for 20 seconds, press the accelerator to the bottom and hold it for about 10 second, then release the accelerator, turn off the ignition switch and pull out the key, and the initialization is completed. The second is to turn on the key in the second gear and hold it for 30 seconds, then turn off the ignition switch and pull out the key. It should be noted that after the completion of the two methods, you have to wait for a while before trying to ignite. Generally, you can wait 15-20 seconds, and then ignite to see if the refueling is normal and the engine fault light is off. (Photo/Text/Photo: Chen Jie 2) @20 19