How to adjust the throttle of 20 10 Buick Regal Expo Edition?

20 10 Buick regal Expo version throttle is adjusted according to the quantity.

1. Judge the height of the accelerator pedal before adjustment: Try to lift the accelerator pedal upward to see how big it is. Generally, there may be a large amount, even a large amount. According to your feeling about the height of the accelerator pedal, decide whether you need to adjust it.

2. Adjustment: Pull the metal wire of the throttle wire to the left (outward) in the engine room to see how big it is. When you can't pull it, it is the highest point of the accelerator pedal. By this time, the accelerator pedal has been pulled up by you.

3. The position of the clamp and cable sheath will determine the height of the accelerator pedal. Pull off the clip, move the sheath to the right and then jam it, which will raise the position of the accelerator pedal, otherwise it will be lowered. Determine where the card is according to your feelings.

4, but pay attention to it carefully, at least leave a little margin when adjusting, and don't let the parts be stressed all the time, otherwise it will be bad for the car.