What is the correct way to step on the gas pedal?

The correct way to step on the accelerator is as follows: 1. Find the position of the accelerator pedal and put the right heel on the ground of the cab as a fulcrum. As shown in the figure, lightly press the accelerator pedal with the sole of your foot, and press or relax with the extension and bending of your ankle. 2, the accelerator pedal pedaling essentials: light step and slow lift, linear acceleration, soft force, don't rush, tiptoe kung fu, don't suddenly shake. 3. Tread lightly and lift slowly: When the engine starts, it is best not to step on the accelerator pedal to the bottom slightly higher than the idle speed. 4. Linear acceleration: When starting, refueling should be slightly before the clutch linkage point, and the throttle opening should be small and medium. Loosen the clutch pedal and press the accelerator pedal closely. 5. Soft power: increase or decrease the throttle opening according to the road conditions and actual needs during driving. The selected gear should be suitable for the engine to run at medium speed most of the time to save fuel. If you press the accelerator pedal 3\u002F4, the engine still can't increase the speed accordingly, so you should shift to a lower gear and then press the accelerator pedal to accelerate. 6. Don't be too hasty: don't step on the accelerator pedal when going uphill. When using low gear, it is generally appropriate to step on the accelerator pedal halfway. 7. Toe-toe Kung Fu: Don't step on the accelerator pedal to the end when rushing downhill. 8. Don't shake suddenly: release the accelerator pedal before the car stops or stalls, and don't blow the accelerator violently.