Replace the idle motor of the scooter.

1. Remove the throttle valve as a whole first, and then pull out the water pipe and plug.

2. Secondly, open the back with needle-nosed pliers, spray carburetor cleaner first, and remove it with toothbrush brush and idling motor, and the disassembly is complete.

Finally, it is good to install the throttle nut in the reverse order. When installing the throttle nut, you can put the nut on the sleeve and slowly install the screw, which is easier. Remember to check if there are any missing installations. The above is the operation method of replacing the idle motor of scooter.