How to clean the electronic throttle idle motor?

Recently, Bian Xiao often received a friend's question about "How to clean the electronic throttle idle motor?" Related news, now explain it for everyone. Idle motor is installed on the throttle, which can be removed by pulling off the plug and unscrewing the screw, and then sprayed with carburetor cleaner for cleaning. It should be noted that the idle motor is a precision part. When cleaning, you must put down the motor cone head, spray carbon on the cone head and sleeve with cleaning agent, and then clean it with a towel to prevent the cleaning agent from entering the motor and causing damage.

Function of electronic throttle idle motor;

1, the idle motor is mainly used to bear the idle speed of the car, and its purpose is to adjust the idle speed according to the engine load at idle speed. Idle stepper motor is installed on the throttle body and used by the engine controller to control the idle speed of the engine. When the engine speed deviates from the idle speed, it is adjusted by the throttle valve to control the amount of air entering the intake manifold, which is mechanically operated by the accelerator pedal wire rope.

2. The throttle body has a bypass air passage to provide air when the engine is idling (when the throttle is closed). The pivot of the automatic idle motor extends into the bypass duct to adjust the air flow, and the engine controller adjusts the engine idle speed by moving the pivot of the automatic idle motor in and out of the bypass duct according to the input signals of various sensors;

3. When the ignition key is turned to the on position, the automatic idle motor starts to work. The switch signal is input to ECU to detect whether the engine is idling. At the same time, the instantaneous position of motor is fed back to ECU through motor position sensor.

Million car purchase subsidy