What is the resistance of the throttle position sensor of EFI motorcycle?

When the throttle is in the idle position, the general resistance value is1000Ω, and it is 4000Ω when the throttle is fully open.

The analog signal voltage of the throttle position sensor (TPS) increases with the increase of throttle opening. When the throttle is in the idle position, the general resistance value is1000Ω, and it is 4000Ω when the throttle is fully open. The voltage signal is 0.5 ~ 1.0V at idle speed and 4.5V at full open. The simulation signal of TPS can be sent to the computer to accurately locate the throttle valve, and the computer can also know the opening speed of the throttle valve and provide different mixed steam according to the opening speed and opening position. It is considered that the mixed steam is too thin, which leads to the tempering failure of the fuel filler door, or it may be that the calorific value of the spark plug does not match. In addition to the above two points, if flashback occurs immediately after refueling, it may also be the fault of throttle position sensor and intake pressure sensor.