How to adjust the valve of Jiangling Transit?

When adjusting the valve, first loosen the fixing screw of the valve and turn the magneto of the crankshaft to make the camshaft rise against the exhaust valve. The specific operation steps are as follows:

1. First loosen the fixing screw of the regulating valve. As shown in the figure

2. Turn the magneto of the crankshaft to make the camshaft rise against the exhaust valve. As shown in the figure

3. Hold the valve screw and lift the plate upward. As shown in the figure

4. Pull up the valve screw and adjust the fixing screw by tightening it several times. As shown in the figure

5. Tighten the screws with needle-nosed pliers. As shown in the figure

6. Clamp the screw with needle-nosed pliers and tighten the adjusting screw with adjustable-mouth wrench. As shown in the figure

Extended data:

1, the valve of a new car needs to be seated, and it will generally be stable after the running-in period. After the running-in period is adjusted, the gap may change, so it will be readjusted, so that one thing can be omitted and then adjusted.

2. Loose valve (slightly larger clearance) will only make the noise level slightly larger, and there will be no other adverse effects.

3. Due to the design and structure of the engine, the vibration of the ejector pin machine is greater than that of the chain machine. When driving at a medium speed (about 50 miles per hour), the vibration frequency of the engine overlaps with that of the whole vehicle, and the so-called * * * earthquake will occur.