How to disassemble the Han Teng x7 throttle?

There are two ways to clean the Hanteng x7 throttle: the first way is to remove it and clean the throttle body with carburetor cleaner (chemical cleaner for short) (or don't directly remove it from the car and spray it with chemical cleaner and then wipe it); The other is to use the air inlet to maintain and clean the engine (spray the throttle with the self-contained cleaning agent or steel bottle when driving to keep the engine running). Manual disassembly and cleaning can only clean the throttle, but also clean the carbon deposit on the top of the piston at the air inlet and valve port. Wide cleaning range. Either way, the throttle must be initialized and reset by the computer after cleaning the throttle, otherwise there will be idle jitter. Throttle is a controllable valve that controls air to enter the engine. After the gas enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be burned to do work. It connects the air filter and the engine block, and is called the throat of the automobile engine.