How to disassemble and assemble the electric throttle motor of Outlander throttle

The disassembly and assembly method of the Outlander throttle electric throttle motor is as follows:

1. Disconnect the negative cable of the vehicle to avoid electric shock and short circuit.

2. Open the engine hood and find the position of the throttle electric throttle motor, which is located next to the throttle.

3. Remove the wire connector of the electric throttle motor. You need to press the button on the connector to remove it easily.

4. Use a wrench or torque wrench to remove the fixing screw and remove the electric throttle motor.

5. Install the new electric throttle motor back to its original position and fix it with screws. The torque of the screw should not be too tight or too loose.

6. Connect the wire connector, ensure the connection is firm, and reconnect the negative cable of the vehicle.

7. Start the engine and test whether the throttle valve works normally.