How much does it cost to clean the accelerator of Cheetah cs9, and how long does it take to clean the accelerator of Cheetah cs9?

The price of cleaning the accelerator of Cheetah cs9: Generally, cleaning the accelerator in the roadside shop outside is about 100-200 yuan (if it doesn't match, it will be less, maybe around 50 yuan), and it is more expensive in the 4S shop. Generally, a barrel of cleaning agent is about 100 yuan, and the labor cost is 120. It will be more expensive if matched, maybe 400-800 yuan. The accelerator cleaning time of Cheetah cs9 is generally about 30,000 kilometers. If it is not cleaned for a long time, the engine fault light will light up, the idle speed will be unstable and the fuel consumption will increase. The method for cleaning the accelerator of Cheetah cs9 is as follows: Step 1: Prepare tools: a small wrench No 10 (remove the battery terminal), a large Phillips screwdriver (remove the air inlet elbow), a T30 internal wrench (remove the accelerator) and a bottle of carburetor cleaner. Step 2: Remove the throttle inlet elbow. Step 3: Unplug the throttle harness plug. Step 4: Remove the throttle body. Automobile throttle function: control the air intake, and the throttle position sensor can automatically control the fuel quantity. In other words, it is the device that controls the throttle. Classification: one is a semi-mechanical and semi-electronic throttle controlled by a cable, and the other is an all-electronic throttle with a signal from a sensor. Throttle opening is calculated by computer according to intake air volume and sensor angle.