Where is the Iveco engine glow plug?

The engine preheating plug of Iveco car is located on the intake branch pipe, which can be seen by carefully observing the intake branch pipe of the car.

The reason why it is difficult to start a cold car is that the accelerator device of the car has too much carbon, which makes it difficult to start.

The solution is: it is difficult to check whether the accelerator device of the car has too much carbon deposit, and timely treatment of carbon deposit can solve the difficulty of car cold start.

It is difficult to start a car cold, so it is necessary to check the circuit connection in the engine compartment frequently to see if there is looseness and corrosion. Once found, go to the 4S shop for maintenance immediately. Then, when starting the vehicle in the morning, the starting time should not exceed 5 seconds each time, and the interval should be greater than 10 second.

Extended data:

Preventive measures for difficulties in cold starting of Iveco cars are as follows:

Check the battery case for electrolyte leakage. If there is leakage, replace the battery; If there is no leakage, clean the oxide on the battery surface and electrode with hot water, but be careful not to let water enter the battery through the vent hole.

Check the battery voltage. Under the condition of normal engine temperature and good starter technology, the engine can start smoothly after several consecutive starts, indicating that the battery is in good condition and the voltage is normal. The engine speed decreases gradually at each start, or the engine can hardly start.

Phoenix Net-Iveco's new Daily9-seat luxury commercial vehicle price list

Baidu encyclopedia-car cold start