Is it necessary to clean up the carbon in the car?

The carbon deposits on the vehicles of Pacific Auto Network need to be cleaned up, because if the carbon deposits are not cleaned up for a long time, the following consequences will be caused: 1, the engine power will be reduced, and the power output will be uneven and gradually attenuated; 2. Excessive carbon deposition will increase fuel consumption and fuel cost burden; 3, cold start is difficult, that is, it is difficult to strike a fire and it is not easy to drive; 4. Carbon deposition in the combustion chamber seriously causes cylinder knocking, low-speed acceleration noise, piston and crankshaft damage, which seriously affects the safety of automobiles.

It is necessary to clean the engine combustion chamber, which can remove the carbon deposit in the engine combustion chamber, help the engine maintenance and reduce the engine loss. Every car will have carbon deposition, because it is inevitable, just the difference in carbon deposition.

It is necessary to clean the engine combustion chamber, which can remove the carbon deposit in the engine combustion chamber, help the engine maintenance and reduce the engine loss.

It is necessary to clean the engine combustion chamber. Now many 4S shops and auto repair shops have products and equipment for cleaning combustion chambers. The role of combustion chamber cleaning:

1, mainly to remove carbon deposits in the engine combustion chamber, if it is difficult to start the engine cold at ordinary times;

2, the engine idle speed is unstable, the acceleration is poor, and the engine power is reduced;

3. Engine knocking happens from time to time, so it is necessary to clean the combustion chamber, which is also the best way to solve this kind of problem.

1, the most common thing is to remove the throttle valve, clean the throttle valve with carburetor before and after, and dry it with cotton cloth. It is generally recommended to clean the lower throttle every year or 20,000 kilometers. Of course, different models will have different cleaning cycles, which can be done according to the maintenance manual.

2. Clean up the carbon deposit inside the engine, which can be done before replacing the new engine oil. Open the oil cover, add the cleaning agent, mix it with the old oil, and run at idle speed for about 10 minutes. The cleaning agent can be purchased by yourself, and the operation is very simple.

3. Cleaning the air intake system: buy a bottle of cleaning agent for the air intake system, pour it into the liquid storage tank of special cleaning equipment, connect the air intake capacity system, and suck the cleaning agent into the air intake by vacuum to achieve the cleaning purpose. Cleaning the carbon deposit in the intake system mainly refers to cleaning the carbon deposit in the intake and intake manifold.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)