Top ten engines

Ford 2.3L turbocharged inline four-cylinder gasoline engine, general 6.2L naturally aspirated V-type eight-cylinder gasoline engine, general 3.0L turbocharged inline six-cylinder diesel engine, FCA3.6L naturally aspirated V-type six-cylinder engine +48V light mixing system, BMW 3.0L turbocharged inline six-cylinder gasoline engine;

Daimler 3.0L turbocharged inline six-cylinder gasoline engine +48V light mixing, Honda 2.0L Atkinson cycle naturally aspirated inline four-cylinder engine, Hyundai 1.5L turbocharged inline four-cylinder gasoline engine, Nissan 2.0L inline four-cylinder engine, BYD Korea DM-i super hybrid engine.

Ford 2.3 liter turbocharged four-cylinder engine

This engine is the engine of Ford Explorer series, and the Ford Mustang which was later sold in China was also equipped with this engine. It is characterized by improving the intake manifold, increasing the volume and throttle diameter. In addition, the double scroll turbocharger makes the engine power and response speed to a higher level.

General 6.2-liter naturally aspirated V-type eight-cylinder engine

As can be seen from the name, the power performance of this engine is very strong, but the general Chevrolet Corvette is equipped with this engine, and other vehicles are relatively rare. It adopts many advanced technologies such as direct injection in cylinder and continuously variable valve timing system, which greatly reduces the fuel consumption of the engine.

Factors affecting fuel consumption per 100 kilometers

1, driving operation: If our car owners often step on the accelerator and brake frequently, then the vehicle speed will be in a state of high and low, so the fuel combustion efficiency will be reduced, resulting in an increase in fuel consumption. If the vehicle runs at a constant speed, the working state of the engine will be relatively stable, and the fuel will burn fully and the natural fuel consumption will be low.

2. Road environment: If the road section where our car owners usually drive is easily blocked, there will be a lot of unnecessary fuel consumption during the stop-and-go process. However, if the road section where the owner usually travels is relatively smooth, then the vehicle will not produce excess fuel consumption during operation, thus reducing the fuel consumption per 100 kilometers.