How to disassemble the Chevrolet Cruze throttle and how to match the Cruze throttle?

Chevrolet Cruze throttle disassembly method: Chevrolet Cruze throttle is generally fixed with four screws. The two screws on the top are easy to remove, and the one on the bottom is a bit awkward. We suggest that the following two screws which are difficult to remove should be removed first, so as to avoid that the screws below are difficult to remove when they are finally removed, because the screws above have been removed and are not fixed, and the throttle will shake. After the four screws of the Chevrolet Cruze accelerator are removed, the accelerator can be removed. At this time, the exposed pipeline is the air inlet. Chevrolet Cruze throttle matching method: 1. Turn the key to the power gear first, and never start the car, that is, turn it off. 2. After standing for about 10 second, quickly step on the accelerator pedal to the end. Be sure to step on it quickly, press and hold 15 seconds to lift the pedal quickly. 3. Then close the key door, take out the key and let it stand for about 15 seconds. 4. Start the car normally and the game is over. Throttle is a controllable valve, which is used to control the air entering the engine. After entering the intake pipe, it will be mixed with gasoline (the mixing parts of different models are different) to become combustible mixture, which will participate in combustion and do work. Four-stroke gasoline engines are generally like this. Throttle is the most important component in today's EFI automobile engine system. Its upper part is the air filter, and the lower part is the engine body, which is the throat of the automobile engine. Whether the acceleration of a car is flexible is closely related to the cleanliness of the throttle.