How to Solve the Air Leakage of Zhongtai T600 Throttle

How to solve the air leakage in front of Zotye t600 throttle How to solve the air leakage in front of Zotye T600 throttle At this time, the driver needs to open the hood of the car, find the air filter, and remove it to expose the air valve; When the throttle is turned off, the driver can push it away with a wrench, brush it back and forth, wipe it with a paper towel again, and finally put the air filter back in place. Regular cleaning of the throttle valve can eliminate it. The reason for the air leakage of the valve is that there is too much carbon deposited on the inner wall, which leads to the lax sealing of the throttle opening. At present, most cars use electronic throttle to control the air intake of the engine. When the accelerator pedal is depressed, the throttle opening becomes larger. At this time, more air enters the engine. When the sensor detects that air enters the engine, it will inject more fuel. Therefore, the throttle valve is easy to deposit carbon after long-term use. So is Zotye t600. The air leakage from the accelerator of Zotye t600 will lead to unstable idle speed of the engine and black hood. When driving, you will feel bumpy, lack of power, and occasionally turn off the engine. If the throttle leaks when driving Zotye t600, the driver can disassemble and clean it according to the above method, and be careful when replacing it. In this way, the leakage of throttle valve can be completely avoided. @20 19