How to remove carbon deposit from Cadillac srx engine

Cause of carbon deposition: Due to the control characteristics of EFI engine, the cylinder injects fuel before ignition. When we put out the engine, the ignition is cut off immediately, but the gasoline sprayed in this working cycle cannot be recovered. After the unburned gasoline in the cylinder volatilizes, the residual glue and wax will be deposited on the cylinder wall and valve, and can only be attached to the intake valve and combustion chamber wall. If it is not cleaned in time, it will accumulate thicker and thicker, and it will become carbon deposit after repeated heating. One of the ways to remove carbon deposits is that the carbon deposits are not too serious, and the disassembly-free cleaning method is adopted. "The method is simple and labor-saving, just use it right. However, for engines with serious carbon deposition, this method is not sufficient and cannot achieve the goal of thorough cleaning. After disassembly and cleaning, if the working performance of the engine is still not good, you should pay attention. It may be caused by too much carbon in the valve and cylinder, so you have to disassemble the engine to solve it. Cleaning the valve carbon deposit is relatively simple. After the intake manifold is removed, it can be removed by hand or soaked in cleaning medicine. As for the cleaning of carbon deposits in engine cylinders, it is necessary to "make a big move", first remove the cylinder head and timing belt before cleaning. However, attention should be paid during the cleaning process. Cleaning up carbon deposits in automobiles is a very important job. Generally speaking, it is not recommended to operate by yourself. It is very important to go to relevant professional places for cleaning. In fact, daily maintenance is also very important. Minimizing the formation of carbon deposits can effectively protect the engine. You should not only cultivate good driving habits, but also try not to shift gears at low speed. In this case, gasoline will burn insufficiently, which is easy to produce carbon deposit. Regular cleaning and maintenance are also important.