What is the weak acceleration of Jog 100?

There are many reasons for the lack of acceleration.

There are several reasons:

1, electronic control system (burner, ignition circuit, ignition time, etc. can be checked. )

2, oil supply system (can check the oil pump pressure, tubing pressure, oil filter, etc. )

3. Cylinder (pressure sensor and throttle sensor can be checked)

4. Mechanical system

I think we should first confirm whether the exhaust gas value is rich or lean, and we can test the exhaust gas value at 2000 rpm. It is also best to upload data and analyze it. If there is an oscilloscope, we can test the signal waveforms of the input line and the output line at the interface of the computer to make sure that there is no fault in the electronic control system of the engine, and then check the others. Finally, you can ask the owner if the transmission has been repaired or the gear has been changed, resulting in the wrong transmission ratio (you can also use the method of testing the highest speed to see if the engine power is really insufficient? This is my personal opinion. If there are any mistakes, please criticize and correct them. Thank you! ! !