What is the matching method of sylphy throttle?

Pacific auto network 1. Turn off the ignition switch and turn the ignition switch to the on position. 2. Repeat the following operations five times in five seconds. Fully depress the accelerator pedal. Loosen the accelerator pedal completely. 3. Start the engine and let it idle for a period of time. 4, idle running for more than 20 seconds. 5. Run the engine at high speed for two or three times, and confirm that the idle speed and ignition timing meet the requirements.

If it is used for long-term urban driving, stop-and-go, and hot and humid climate, it is recommended to clean the throttle. If the road conditions are good, the cleaning can be postponed, but it is best to clean the throttle every 30,000-40,000 kilometers. If the throttle valve is not cleaned for a long time, it will affect the idling stability of the engine, lead to the slow acceleration of the engine, increase the fuel consumption, and more seriously lead to the difficulty in starting the cold car. Dongfeng Nissan's throttle cleaning needs to match the idle speed value, otherwise the ignition timing and idle speed value will not be within the standard range. For manual matching mode, it needs some operating experience and time to master. If it is the first time, it is recommended to use a stopwatch as a time reference, otherwise it will be difficult to succeed in learning. (Photo/Text/Photo: Pacific Auto Network Li Shuiqing)