How to adjust the idle speed of Nissan Sylphy and how to adjust the idle speed of Sylphy?

Nissan Sylphy adjusts the idle speed by re-matching the throttle to make the idle speed normal.

First, warm up the engine to normal operating temperature, and then continue the following operations:

Turn off the ignition switch and wait at least 10 second;

Ensure that the accelerator pedal is completely released, turn the ignition switch to the on position and wait for 3 seconds;

Quickly repeat the following operations for 5 times within 5 seconds, completely press the accelerator pedal and completely release the accelerator pedal;

Wait for 7 seconds, fully press the accelerator pedal, and keep this state for about 20 seconds until the MIL stops flashing and starts to light up;

Fully release the accelerator pedal within 3 seconds after the MIL light is turned on;

Start the engine and let it idle for a period of time; Idle for more than 20 seconds;

Run the engine at high speed for two or three times to ensure that the idle speed and ignition timing meet the requirements.