08 Odyssey Throttle Matching Method

08 Odyssey throttle matching method is as follows:

1. Connect the 43 1 Pro3s+ device to the vehicle, BD interface, connect the WiFi network, open the software, click the special function on the home page, and click the throttle matching.

2. Click OK to enter, then select Honda automatic identification model, and click the accelerator to learn.

3. Click OK according to the prompt and turn on the ignition switch.

4. Move the engine from the shift lever to the N position and pull up the parking brake. Click OK.

5. The computer shows that the TP learning value has been cleared. Keep the parking brake and gear at N according to the prompt, and then click OK.

6. The computer shows that the engine control module/powertrain control module has been reset. Click OK.

7. Pay attention to the system prompt information. After cleaning, the idle speed will be low or unstable. At this time, you need to be idle at 10m. Welcome to learn.

8. Learning status can be entered into Honda system. Click on the engine system to read the data stream, and manually select-Idle learning (idle air) to see whether the vehicle idle learning is successful.

9. Wait 10 minutes, and then complete the throttle matching. Otherwise, repeat this learning path.