Traditional Culture Encyclopedia - The 24 Solar Terms - The phenomenon of engine backfire explains the reason of engine backfire.
The phenomenon of engine backfire explains the reason of engine backfire.
Engine tempering phenomenon
In addition to abnormal noise, it also shows that the engine power drops and the car shrugs when accelerating. The common causes of such failures can be divided into two categories: lean mixture and abnormal ignition timing.
1 The mixture is too thin.
The common causes of mixture dilution are: air flow sensor failure, abnormal signal of throttle position sensor, low pressure of fuel system, abnormal coolant temperature sensor, blocked injector, etc.
0 1 ignition time is abnormal.
The common causes of abnormal ignition timing are: abnormal signal of camshaft position sensor, electric leakage of ignition coil, abnormal valve timing, etc.
Routine troubleshooting steps of engine tempering fault:
Maintenance case of engine tempering fault 1
Model: Jetta King car, 5-valve engine
Fault phenomenon:
The engine shakes when idling and backfires when accelerating rapidly.
Fault analysis:
Check the air filter first, and no blockage is found.
Before commissioning, replace the fuel filter and clean the four injectors.
The fault phenomenon still exists. Check whether the fuel pressure, idle speed and acceleration are normal.
Check the air intake system for air leakage.
After taking off the plug of the air flowmeter for trial operation, it is found that the fault phenomenon has been greatly improved.
Check the resistance between terminals of air flow meter, and it is normal.
Observe the resistance, it works well, but it is found that there is dust on the resistance.
Use carburetor cleaner to remove dust, refit and test, and troubleshoot.
Case 2 of engine tempering fault maintenance
Model: Chery QQ
Fault phenomenon: the vehicle can't start, backfire when accelerating after starting, or even stall.
Fault analysis:
Check the system with a diagnostic instrument. There are no fault codes in the system.
First, check the signals of engine timing, camshaft position sensor and crankshaft position sensor, which are all normal.
Then, after removing the intake hose, start the engine again, and the intake pipe emits white smoke, which is usually caused by the blockage of the exhaust pipe.
After the front part is removed, the engine will start smoothly after restarting.
The inspection of the exhaust system found that the lining of the three-way catalytic converter was burnt and bonded.
Troubleshooting after replacing three-way catalytic converter.
- Related articles
- Junior high school composition with the theme of year
- What are the characteristics of the vernal equinox solar terms? What vegetables and fruits do you eat for health?
- Ten must-eat foods in summer.
- 1987 was born on March 5th (February 6th) at around 6 am. . .
- I was born in 198 1 year 1 month 16 (lunar calendar120th)19: 00. thank you
- Please explain the problem of guqin ~ please be big ~ ~
- The meaning and origin of mango solar terms.
- The three young masters woke up and dissolved the solar terms. Which episode is it?
- About the origin of the Spring Festival in China, it should be translated into Chinese and English.
- A game that drives the class atmosphere.