How much does it cost to clean the throttle?

Now the charge for cleaning the throttle is about 50- 100 yuan.

If there is too much sludge in the accelerator, it may cause poor engine acceleration and increase fuel consumption, which is a big worry for the owner. What should I do if the throttle is dirty? As long as you clean it, you can get it in the 4S shop quickly, but don't you go to the 4S shop every time? Actually, you don't have to. You can handle it yourself. Just don't forget to initialize.

First, apply a little oil on the fixed metal beam ring to avoid slipping teeth during disassembly. Remove the metal ring of the throttle hose. After the hose is removed, the left end is the position of the throttle. Remove the negative electrode of the battery, turn off the ignition switch, straighten the throttle plate, spray a small amount of "carburetor cleaner" into the throttle, and then carefully scrub it with polyester rag or high-spin "non-woven fabric".

When cleaning the throttle valve, it is not necessary to disassemble it, but the sealing part of the inlet steam must be cleaned, and the idle motor must be disassembled for cleaning. There are advantages and disadvantages of cleaning nozzles by borrowing and disassembling. General maintenance stations recommend disassembly and cleaning to prevent other unnecessary waste, such as the need to replace the sealing ring or install some other gaskets after disassembly, or oil leakage during disassembly.

After cleaning, the throttle will be initialized according to the disassembly procedure just now. After cleaning the throttle, it needs to be initialized, because the computer has a memory function when adjusting the throttle opening, because there was sludge blockage in the past. In order to ensure the air intake, the computer will automatically adjust the throttle opening to make the air intake in a normal state.