Geely Yuan Jing gc7 Throttle Matching

1, open the door without closing it. Here, the main driving door can be opened. As soon as the door is closed, the car is considered to be an illegal intrusion, and naturally it will not be decoded;

2. Insert the car key and switch it on and off for six times. Note that the second and third gears are continuous, and the key is on. The second gear is the gear where the instrument panel just doesn't light up, and the third gear is the gear where the indicator light of the on-board instrument is on. Count from second gear to third gear once and from third gear to second gear twice. The speed here must be fast, and you have to do it six times in about 3 seconds. If the speed is slow, it will not be unlocked. Pay attention. That is, when the dashboard is not lit, the car will think that you want to drive, and naturally it will not unlock. After six times, you will hear two beeps (some prospects may be unlocked for 38 times), and the anti-theft device is decoded successfully;

3. At this time, aim the new remote controller and all the original remote controllers at the anti-theft host (under the main driver's seat) in turn, press any key of the unlock or lock key, hold it for 3~4 seconds, and release it immediately after hearing the beep, indicating that the remote controllers are successfully matched. Put this down, then change the rest of the remote control and repeat the third step here in turn, that is, hold down the key to learn the new frequency, and you can complete the learning matching without switching it on and off for six times.

Note: Note that the old remote controller here must match the previous standby remote controller, otherwise the old remote controller will not recognize the decoded new frequency and will be invalid and unavailable;

4. After all matches are completed, wait for 30 seconds, wait for the alarm clock to remember the newly learned frequency, and then pull out the key, OK, so that all remote controllers can be used.