How to adjust the air valve of automatic cutting machine

The adjustment steps of air valve of automatic cutting machine are as follows:

1. Confirm air pressure: Before adjusting the air valve, it is necessary to confirm whether the air pressure meets the requirements. Generally speaking, the air pressure of automatic cutting machine should be about 5-7kg/cm2.

2. Adjust the air pressure: use the pressure regulating valve to adjust the air pressure to the correct range. Too high or too low air pressure will affect the cutting effect of automatic cutting machine.

3. Adjust the opening of the air valve: Adjust the opening of the air valve to a proper position to achieve the best cutting effect. Generally speaking, the valve opening will affect the pressure and flow, which needs to be adjusted according to the actual situation.

4. Test the cutting effect: After adjusting the air valve, it is necessary to test to check whether the cutting effect meets the requirements. If the cutting effect is not good, it is necessary to readjust the air valve until the best cutting effect is achieved.