How to remove the accelerator of Honda Feng Fan?

The disassembly method of Honda Feng Fan throttle is as follows. 1. See the figure for the specific process to remind everyone of cold operation. Remember to wear gloves to avoid injury. First, use the 10 cm sleeve to remove the retaining nut on the housing shown in the figure. 2. Remove the green harness clip in the figure. The removal method of the harness clip is to easily retreat by clamping the barb on the back of the clip. 3. Loosen the snap ring screw on the throttle with a Phillips screwdriver. You can move freely with the snap ring. Pull the empty filter assembly out of the throttle body. The metal crankcase return pipe is inserted into the empty filter box below. Hold the apron clip with one hand and pull it out with the other. After seeing the throttle, clean the black stain on the throttle with special cleaning agent and towel.