How to clean the car throttle yourself?

The method of cleaning the car throttle by yourself is as follows:

The removal tool is ready for easy removal. Cleaning the throttle is mainly to clean the carbon deposit. You can use detergent or detergent to clean, spray detergent to the place where the carbon is deposited, wait for ten minutes, and then clean it again after the carbon is dissolved, which will be cleaner.

1. First, remove the heat shield on the engine and the air line around the throttle. Be sure to remember the location for easy installation. Generally, the throttle near the combustion chamber will be dirty, and this place can be cleaned by itself. If you want to clean it all up, you can go to the 4s shop to get it done.

2, remember to wear gloves when cleaning, the concentration of cleaning agent is very high, to avoid hurting opponents. Brush back and forth with a brush to fully dissolve the carbon deposit, and then wipe it clean with a towel. After cleaning, install it according to the recorded position, and the throttle can continue to work.

How long does it take to clean the throttle yourself?

It usually takes an hour to clean the throttle. There are many steps to clean the throttle according to the profession. Remove the throttle valve, and then clean the throttle valve with cleaning agent. After cleaning the throttle, install the throttle and finally match the throttle with the computer. It takes almost an hour to complete all the steps.

If you don't do a full set of actions, it is estimated that it will be cleaned in less than an hour.