Mitsubishi Grundy throttle master-slave is incorrect.

1, turn the key to the power position and do not start;

2. Let it stand for about 10 second, quickly step on the accelerator pedal to the bottom, hold it for 15 second, and then quickly lift the pedal;

3. Close the key door, remove the key and let it stand for about 15 seconds;

4. Start the car normally; Matching completed;

5. The above is the manual matching method of most electronic throttles, which is basically universal, and the principle is to use the adaptive learning function of the computer; If the first collocation is not ideal, you can repeat it several times.

Mitsubishi Grandi matches the throttle, first turn the key to the power gear, and never start the car, that is, the flameout state; After standing for about 15 seconds, quickly step on the accelerator pedal to the end, be sure to step on it quickly, hold on for 15 seconds, and then quickly lift the pedal; Then close the key door, take out the key and let it stand for about 15 seconds, then start the car normally, and the matching is completed.

Mitsubishi Grandi throttle needs to be matched after cleaning, because the throttle opening before and after cleaning is too different, and the control unit can't control the throttle correctly; You need to connect a diagnostic instrument to match it.