Where is the Toyota Camry sensor?

Sensors have different functions and positions. The sensor locations of Toyota Camry are as follows: 1. Oxygen sensor: The oxygen sensor is located on the exhaust pipe to monitor the gas after combustion. It judges whether the engine is fully burned and whether the mixing degree is too lean or too rich. 2. Wheel speed sensor: The wheel speed sensor is generally located on the front wheel brake disc. It is mainly to collect the speed of the car to judge whether the car slips. Therefore, it is necessary to collect wheel speed sensors specially, which are generally installed on the hub of each wheel. Once the sensor is damaged, ABS will fail. 3. Water temperature sensor: The water temperature sensor is installed next to the thermostat and converts the temperature of cooling water into an electrical signal. Increase the fuel injection or ignition advance angle at low temperature, prevent explosion at high temperature and delay the ignition advance angle. 4. Intake pressure sensor: Intake pressure sensor is generally installed on the throttle. As the name implies, it can sense the difference of engine speed and load, and then sense a series of changes in resistance and pressure and convert them into voltage signals. These signals can be used by ECU system to correct fuel injection quantity and ignition timing angle. If the sensor fails, it will lead to various problems such as difficult ignition, unstable idle speed and weak acceleration.