What should I pay attention to when cleaning the throttle?

When cleaning the throttle, Pacific Auto Network should spray the throttle cleaning solution to the position where there is a lot of carbon deposit, and wait for 5- 10 minutes, and the carbon deposit will be dissolved by the cleaning solution. At this time, brush with a clean brush and wipe with a clean towel. Before installation, it is necessary to wait until the throttle cleaning solution is completely dry, otherwise it will not affect the damage of the position sensor. In order to speed up the drying speed of the throttle, you can take oil-absorbing paper to suck the oil away at a part of the connection position of the throttle.

When cleaning the throttle valve, it is necessary to remove the throttle valve for cleaning, so that it can be cleaned, and it will not be sprayed to the electrical part of the throttle valve because the cleaning liquid is sprayed only in one direction, which will seriously damage the throttle valve.

In most cases, 4s stores will encourage small partners to clean the throttle regularly, usually from 20,000 km to 40,000 km. However, it should be noted that the throttle valve is not cleaned well. Excessive cleaning will affect the premature scrapping of the throttle. Frequent cleaning will lead to the gradual cleaning of the special coating of the throttle cavity, and the inner cavity will lose its coating, which will easily lead to greasy adhesion, thus forming a vicious circle, and the final result will be scrapping.