Where is the Shengda sensor?

The main sensor positions of Shengda are as follows: 1. Oxygen sensor: installed on the exhaust pipe to monitor the gas after combustion. The normal operation of the engine is ensured by judging whether the engine is fully burned and whether the mixing degree is too thin or too rich. 2. Wheel speed sensor: installed on the hub of each wheel, it is mainly used to collect the speed information of the car and judge whether the car is slipping. Once the sensor is damaged, ABS will fail. 3. Water temperature sensor: it is installed next to the temperature controller and converts the temperature of cooling water into an electrical signal. Increase the fuel injection or ignition advance angle at low temperature, prevent explosion at high temperature and delay the ignition advance angle. 4. Intake pressure sensor: generally installed on the throttle. With the different engine speed and load, the intake pressure sensor senses a series of resistance and pressure changes, which are converted into voltage signals for ECU to correct the fuel injection quantity and ignition timing angle.