Right turn and right turn skills

The following are the skills of turning right at a right angle: 1, you must slow down before entering the corner, and the key is to straighten your body; 2. When the car body is straightened, the vehicle slowly approaches the outer edge line of the road, and the lateral spacing is well controlled. It is advisable to keep the distance between the outer wheel and the outer edge line at about 30cm and keep moving in parallel; 3. The front of the car is close to the turning point, and there is no delay in sharp turning. When the front bumper is flush with the protruding point, quickly turn the steering wheel to the limit position. Avoid slamming on the accelerator pedal; 4. First, see if you can surpass it. You should consider taking your time. For right-angle bends that you are not sure or not sure about, you can stop and check them in advance. Be calm when passing, and always pay attention to the movement of the car body and the change of the wheel position. If conditions permit, you can pass slowly under the command of others; 5, the rear wheel in the rearview mirror, the return direction should be remembered clearly. When the front of the car approaches the inflection point of right-angle turning, turn the steering wheel in time; When the front of the car turns to a new direction, it will gradually return to the correct position and make the vehicle move forward. At the same time, you can also look at the movement position of the rear wheel by observing the rearview mirror, that is, turn the steering wheel back when the rear wheel is about to cross the turning inflection point.