What are converse's throttle matching methods?

Pacific Auto Network 08 Converse throttle matching method: Turn off the ignition switch and wait 10 second; Confirm that the accelerator pedal is released, turn the ignition switch to the on position and wait for 3 seconds; Press the accelerator pedal for 3 times within 5 seconds; Wait for 7 seconds, press the accelerator pedal and hold it for 20 seconds until the engine light stops flashing and lights up; Release the accelerator pedal in the last 3 seconds; Start the engine and let it idle for more than 20 seconds; Run the engine at high speed two or three times.

Throttle is a controllable valve that controls air to enter the engine. After the air enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, and the combustion is successful. The throttle can be described as an engine. Throat? When stepping on the accelerator, the engine power is determined by the throttle opening.

Dirty throttle: the most obvious thing is the power of the engine. When the vehicle is unstable at idle speed, difficult to start, and the power drops, it means that the automobile throttle needs to be cleaned.

After cleaning the throttle valve, matching reset is required;

After cleaning the throttle, reset the throttle opening, otherwise the car computer has memorized the opening when there is carbon deposit. If it is not reset, the engine will have unstable idle speed and high speed, which is even worse than before cleaning. Different models have different reset methods. If the owner has concerns, it is best to go to a professional repair shop or 4s shop for maintenance.

(Photo/Text/Photo: Pacific Auto Network Li Caiying)