Is the car cleaning inlet cleaned from the accelerator?

At present, the disassembly-free cleaning method is to use the equipment "hanging bottle" for cleaning, and the use process is as follows:

1. Open the front cover, check whether the special cleaning equipment in the container is clean, and close the valve of the equipment;

2. Pour the cleaning agent into the equipment and hang the equipment on the front cover;

3. Open the air inlet pipe (in front of the gas section);

4. Connect the air pump, open the valve of the equipment, supply air and pressurize it to 3-3.5; /4. Aim the atomizing nozzle of the equipment at the air inlet (inside the throttle valve) and accelerate it to 2000 rpm every 5 minutes;

5. Connect the connector according to the original vehicle condition until the atomizing nozzle is no longer sprayed with cleaning agent, which proves that the cleaning is over.