Traditional Culture Encyclopedia - The 24 Solar Terms - A driving school: Can pulling the expressway really remove carbon deposits?
A driving school: Can pulling the expressway really remove carbon deposits?
At high speed, the carbon deposits on the throttle, air intake and valve will be partially washed away, and only the newly generated carbon deposits with soft texture and low adhesion can be washed away. When the carbon deposits become hard and have high adhesion, it is very difficult to clean them up, let alone run at high speed or use cleaning agents.
When driving at a high speed, the vehicle works under a high load, and the combustion energy is high, so is the spark plug energy, which will burn a part of the carbon deposit on it. When the temperature is high, the carbon deposit will also burn, and the burnt ash will be discharged from the cylinder. This principle is the principle of hydrogen-oxygen decarbonization machine. Removing the carbon deposit in the cylinder with a hydrogen-oxygen decarbonization machine is to inject hydrogen and oxygen into the cylinder, and the combustion of the two will produce a higher temperature and burn the carbon deposit.
What are the requirements for pulling the expressway? When the vehicle is running at 100km/h, the wind resistance alone needs a lot of energy to overcome, so the energy burned in the cylinder will be more sufficient, the combustion speed will be faster, and the effect of removing carbon deposits will be better.
Frequent high-speed driving can not only remove some carbon deposits, but also inhibit the generation of carbon deposits, so vehicles driving at high speed generally have less carbon deposits. For that kind of hard carbon deposit, cleaning agent can only be used to remove it. Now most of them are clean-free, commonly known as infusion bottles.
It can be seen that frequent high-speed switching is actually more to prevent the rapid accumulation of carbon deposits, especially for some cars driving in urban areas for a long time. Car owners had better pull the highway once a month. Running at high speed is not simply to increase the speed, but more importantly to increase the engine speed. Let the engine run at a high speed of more than 3500 rpm, and use the air pressure to wash away the glue accumulated in the cylinder valve, which can prevent and reduce the carbon deposition formed by the engine.
- Related articles
- Where was the location of Princess Zhu Huan filmed? the third part
- The absolute pressure sensor of the intake manifold is damaged. What will happen to the car?
- Analysis: Is it good to be born with a slight cold?
- ANT FOREST, which description fits the solar terms?
- What is the solstice in winter?
- What did the cold ancients do?
- The relationship between shadow length and solar terms
- Is there a custom of eating jiaozi in beginning of autumn?
- 20 19 introduction of spring festival activities in Guizhou
- There are several towns and villages in Dafang County, Bijie Prefecture, Guizhou Province.