Changan cs35, how to match the throttle?

In the case of hot car, disconnect the negative line of the battery, and after three minutes, install and reset the battery stack and fasten it. Then go back to the car and press the one-button start button twice to light up the dashboard. After vehicle self-inspection, depress the accelerator pedal deeply for more than 5 seconds, and then release it. After the vehicle is completely reset, start the vehicle, and keep the rotation speed above 3000 for not less than 10 second. 10 seconds later, release the throttle, and shut down the engine after the speed drops.

Because the current vehicles use electronic throttle bodies, it is necessary to initialize the settings with a diagnostic computer after cleaning, and the idling speed is normal after re-matching, which is the most economical. There is no need to match the fuel injector and air inlet after cleaning, but it is best to run at high speed after cleaning these parts to achieve the best cleaning effect.

When cleaning the throttle, it is not necessary to disassemble it, but the sealed part of the air inlet must be cleaned, and the idle motor must be disassembled for cleaning. Disassembly and cleaning of fuel nozzles have their own advantages and disadvantages. Generally speaking, the maintenance station suggests that disassembly and cleaning are not needed to prevent other unnecessary waste, such as replacing the sealing ring or installing some other gaskets after disassembly, or delaying the owner's time due to oil leakage during disassembly and assembly.

(Photo/Text/Photo: Li Shuiqing) @20 19