How to adjust the clearance of 20 kg electromagnetic brake?

1. Loosen the mounting bolts evenly with a hexagon wrench;

2. Adjust the hollow screw with a wrench, and pay attention to the fact that the two hollow screws on the same mounting bolt should be adjusted together; After tightening the mounting bolts, test the air gap with a feeler gauge. After the test is qualified, adjust the air gap at the mounting bolt spaced from it until the air gap at all positions is qualified.

3. After that, tighten the mounting bolts with a hexagon wrench;

4. Re-check the air gap with a feeler gauge. If it is unqualified, repeat step 2 again to readjust until the adjustment is completed;

5. Non-professionals had better not adjust the gap, do not have oil dripping into the friction plate, and do not damage the conductor sheath.