Where is the correct position of the accelerator pedal cable of the seventh generation Accord?

The seventh-generation Accord accelerator pedal cable is adjusted as follows:

When removing the throttle pedal, remove the throttle line from the throttle and screw a line on the other end of the line. Try not to adjust too much every time, and then check the deflection of the wire rope after adjustment. It is best to control it within a suitable range. Too tight adjustment may increase idle speed. The throttle line of some cars is not fixed on the bracket with a buckle, but with a nut. When adjusting, first loosen the fixing nut with a small wrench, and then rotate the position of the adjusting nut to adjust the tightness of the throttle pipe.