How to adjust the j6 airbag control valve?

J6 airbag regulating valve is located under the airbag shock absorber. If the bump is serious, operate the regulating valve to reduce the air pressure of the airbag to improve the comfort of the seat. The airbag seat has an adjustment stroke. Do not exceed the maximum stroke, otherwise the airbag will be damaged.

The air pressure adjusting device of airbag seat can adjust the height, backrest angle and seat position of the seat, thus improving the riding comfort and comfort of the car and making the driver more comfortable. The shock-absorbing limit wrench can move the limit handle and fasten the hook to protect the shock-absorbing system under the condition of bad road conditions and serious bumps.

Sliding the adjusting handle can pull up the release limit, and the seat cushion can move back and forth. Pull up the front lifting wrench to lift the seat cushion forward, and the angle and height of the seat cushion can be adjusted. The rear end lifting wrench can lift the rear end of the seat cushion by pulling upward. Pull up the handle of the recliner, the limit will be disengaged and the backrest angle can be adjusted.

When using the car at ordinary times, adjust the seat to the most comfortable position after getting on the bus, which will not increase the fatigue when driving. To adjust the hardness of the airbag seat, just adjust the airbag pressure. The airbag seat needs maintenance, and the dust on the airbag surface should be cleaned regularly to avoid the airbag from wearing and leaking. (Photo/Text/Photo: Pacific Auto Network Wu Jiahong)