Wuling lamps are not as hot as high-voltage lines. What happened?

Wuling lamp has no high-pressure fire, but the ignition coil is hot, which may be because the resistance of the ignition coil is too large, resulting in more heat when the current passes. Here are some possible reasons and solutions:

1. Ignition coil quality problem: If the ignition coil is of poor quality or has aged, it may lead to excessive resistance, thus generating excessive heat. In this case, the ignition coil needs to be replaced.

2. Poor ignition coil connector: If the ignition coil connector is loose or dirty, the resistance may increase, which may lead to coil heating. At this time, the connector should be inspected and cleaned to ensure good contact.

3. Ignition system failure: Ignition system failure, such as the problems of ignition module, distributor and other components, may also cause the ignition coil to heat up. In this case, it is necessary to check the whole ignition system, find out the cause of the failure and repair it.

4. Power supply problem: If the vehicle power supply voltage is unstable or insufficient, the resistance of the ignition coil may increase, causing the coil to heat up. At this time, the vehicle power supply system should be checked to ensure that the power supply voltage is stable.

To sum up, Wuling Light did not catch fire under high pressure, but the ignition coil was heated, which may be caused by various reasons. It is suggested to go to a professional garage for inspection and maintenance in time to ensure driving safety.