How to match the throttle of Ma 6?

Pacific Auto Network Horse 6 throttle matching method: power-off matching method: disconnect the negative electrode of the battery for 5 seconds and then reinstall it; Turn the ignition switch to the ON position, hold down the accelerator for 5S and then release it; Turn off the ignition switch, then turn on and start the engine to see if it is normal, otherwise repeat steps 1 and 2. Restart the ignition: After changing the throttle, turn on the key of the ignition switch for many times, and the on-board computer will delete the memory of the crude oil door, store the data of the new throttle, hit the vehicle, and the vehicle runs normally, that is, complete the matching.

Another method is diagnostic instrument matching: after changing the throttle, you can use the special diagnostic instrument for the car to match. After entering the system, you can choose the action test and click the adaptive value to zero. This is done several times in a row, and the vehicle starts to run normally, indicating that the matching is successful;

Open for a long time, the throttle will accumulate some dirty things. When there is too much dirt, it will often lead to insufficient air intake of the engine, which will lead to unstable idle speed of the engine, sudden feeling about the throttle when driving, reduced power, and even serious problems such as difficult starting and increased fuel consumption. There is no specific time limit for how often the throttle valve is cleaned, and it is usually cleaned when the above symptoms appear.

It is generally recommended that car owners clean the throttle every 20,000-40,000 kilometers, but this is only a reference value. The specific cleaning cycle depends on the air environment of the personal car, the type of oil used, the interval between changing air filters and driving habits.

(Photo/Text/Photo: Pacific Auto Network Li Caiying)