Where is the external circulation air inlet of Roewe rx5?

The external circulation air inlet of Roewe rx5 of Pacific Auto Network is in the auxiliary cockpit and storage box. If there is a plastic heat shield on the engine, it needs to be removed first. Remove the engine cover, and the throttle can be seen under normal conditions.

Trent's throttle is fixed on the engine block by four bolts, which can be quickly disassembled with suitable tools.

The side of the throttle near the combustion chamber is generally dirty, and the black carbon trace is the main part that needs cleaning.

Cleaning the throttle is mainly to remove carbon deposits on it, and special throttle cleaning liquid or cleaner can be used. It should be noted here that the cleaning principle of this cleaning agent is to dissolve carbon deposit, and its composition is harmful to human body. It is best to wear gloves and masks when cleaning.

Spray the cleaner to the position with more carbon deposits on the throttle, and wait for about 5- 10 minutes to dissolve the carbon deposits. Using brushes can speed up the removal of carbon deposits.

When you see that the stain on the accelerator has completely dissolved, you can clean the detergent inside the accelerator with a clean towel. The picture above shows the clean back of the throttle, with no traces of carbon deposition.

Install the cleaned throttle valve on the machine body according to the original position, and then install all air pipes to complete the whole process of cleaning the throttle valve. After all the hardware is installed, throttle needs to be initialized.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)