How to change the throttle line of the Freedom Ship?

First of all, adjusting the virtual position of the throttle is actually adjusting the tension of the throttle line. The end of the throttle line is tied to the throttle. From the throttle to the throttle cable seat, it is found that the cable is not completely tightened, and the cable has a certain deflection, which is about 5-8 mm for ordinary cars.

If you want to reduce the virtual position of the throttle, that is, reduce the deflection, the adjusting mechanism is on the fixing frame of the throttle cable.

Unless your driving style is more radical, don't adjust the deflection below 3mm, so the fuel consumption will be more inadvertently consumed. The accelerator cable may look dirty, but don't try to clean it. This is grease from the throttle line.

Try not to adjust too much every time, and then check the deflection of the wire rope after adjustment. It is best to control it within a suitable range. Too tight adjustment may increase idle speed. The throttle line of some cars is not fixed on the bracket with a buckle, but with a nut. When adjusting, first loosen the fixing nut with a small wrench, and then rotate the position of the adjusting nut to adjust the tightness of the throttle pipe.

In addition, if your car is an electronic accelerator, you can't adjust it yourself, because the stroke of the accelerator pedal and the adjusted accelerator opening do not correspond to the records stored in the engine computer in advance, and the adjustment position is near the accelerator pedal, so you need to go to the repair shop to match the accelerator with special instruments.