How to remove the copper core in the middle of the gas stove

First, how to remove the copper core in the middle of the gas stove?

1. Before disassembly, turn off the gas stove and let it cool before disassembly.

2. First take out the bracket on the stove, leaving the fire cover part of the gas stove, and the copper core in the middle can be directly pulled out.

3. If not, it is likely that the copper core will rust for a long time and cannot be pulled out. Just drop some lubricating oil into the position of the switch, let it stand for a few minutes, then loosen the copper core with a wrench and you can pull it out.

4. You can also tap the copper core. But be careful not to knock too hard, otherwise it may damage the gas stove.

Second, the use of gas stoves matters needing attention

1. Try to choose a gas stove with automatic flameout protection device when purchasing, which will be safer to use. Professionals are required to check whether there is air leakage during installation and whether the flame is normal after installation.

2. If the gas is inexplicably turned off during use, close the gas valve, open the window for ventilation in time, and check whether there is the smell of gas leakage. If yes, please find a professional for maintenance and inspection in time.

3. If the gas is used for a long time, it is necessary to regularly check whether the gas hose is aging and worn. The method is simple. Just put soap on the hose and see if there are any bubbles. If yes, it proves that the hose is leaking and should be replaced in time.

4. Check the fire hole regularly. If the fire hole is blocked by oil, it will lead to backfire and affect the service life of the gas stove.