How much is a meter for drilling wells in rural areas?

The depth of one meter is about 100 yuan to 150 yuan, which is mainly determined by the soil quality and construction difficulty of the well.

This is only the cost of drilling, excluding facilities such as pumps, and materials such as pumps and pipelines are counted separately.

Drilling teams in different regions charge different fees. Some drilling teams with lower fees are not responsible for exploration, but only for drilling. There is also a charge for drilling to a specified depth without water, and some drilling teams are responsible for exploration. Charge only when draining water. If there is no water, it will help to continue exploration, and no drilling fee will be charged until the water is drained.

Extended data:

Precautions for drilling:

1. Select a wellhead position, dig a circular well with the same diameter and depth as the drill bit as required, and then put the drill bit in.

2. Align the center of the rotary hole of the drilling rig with the center of the excavated circular well, and then place the drilling rig. Hang a rope on the pulley above the derrick and tie an object. Adjust the leg to align the rope with the center of the turntable hole, and put a big wooden block under the leg to make the leg stable and reliable. one

3. Dig a mud pit with a width of 2m, a length of 3m and a depth of 1m at a distance of 5m from the drilling rig, so that the drilling rig can stir the mud when drilling into the sand layer. one

4. Place the submersible pump in a well or other water source near the well point, and then connect the submersible pump to the pressure head port through a water pipe. Used to scour the soil when drilling holes.

5, docking drill pipe, diesel engine throttle should be small. Try not to swing the drill pipe from side to side to avoid premature damage to the drill pipe thread.