How to remove the wire from Hao Ying air filter?

1. Preparation tools: screwdriver and needle-nosed pliers.

2. Find the air filter element: The air filter element is usually located at the air inlet of the engine, and its position can be found according to the vehicle manual or schematic diagram.

4. Remove the old filter element: remove the screw fixing the air filter element with a screwdriver, and then remove the old filter element by hand.

4. Wire removal: Remove the wires from the old filter element with needle-nosed pliers, which are usually connected with the air filter element and throttle valve. Be careful not to damage the pipeline during disassembly.

5. Install the new filter element: insert the new filter element into the air inlet, and then fix the filter element with a screwdriver.

6. Connecting wire: Connect the wire on the new filter element with the throttle valve, and generally plug it into the socket on the throttle valve. Pay attention to the line sequence and corresponding relationship when connecting to ensure the correct connection.

7. Debugging: Start the engine, check whether the air filter element is firmly installed, and debug the throttle position to ensure the normal operation of the air flowmeter.